Things to consider:  

  • Make sure the signal cable has some slack so that it is not bearing the entire weight of the transducer. Also, make sure the support cable is taut so that the transducer hangs straight down.   If you chose not to use the transducer support cable, see the image below on how to keep your transducer aligned properly.   
  • Are you in a river or lake that has a current? Current will pull your jig away from the cone angle. 
  • If you are fishing deeper than 20' make sure you are using the narrow beam, not the wide beam.  
  • Make sure your transducer and jig are in the same hole. Fishing from a hole that is different than the one the transducer is located will not allow you to see the jig. 
  • Increase your sensitivity settings.

If you need additional information about this, please contact us .  
For tips on using your Humminbird Ice Flasher catch Brian "Bro" Brosdahl  or LindnerMedia  in action.