The compact Side Imaging transducer, part number XNT 9 SI 180 T  is made up of the following frequencies and beam angles:

200/83/455 kHz
20/60/180 degrees 

This transducer was designed for use and was/is packed with the 398ci SI, 598ci SI, 698ci SI, 797c SI, 798c SI, 798ci SI, 798ci HD SI, 899ci HD SI, HELIX 5 SI GPS, HELIX 5 SI GPS G2, HELIX 7 SI GPS, HELIX 7 SI GPS G2, HELIX 7 SI GPS G2N and HELIX 9 SI GPS models. 

 

The high definition Side Imaging transducer, part number XHS 9 HDSI 180 T    is made up of the following frequencies and beam angles:

200/83/455/800 kHz
20/60/86(2)/55(2)

This transducer was designed for use and was/is packed with the 898c SI, 898c HD SI, 987c SI, 997c SI, 998c SI, 998c HD SI, 999ci HD SI, 1197c SI, 1198c SI, 1199ci HD SI, HELIX 10 SI GPS, HELIX 12 CHIRP SI GPS models.  

This transducer can also be used with those products listed above under the XNT 9 SI 180 T .  However, those models do NOT support the 800 kHz elements in this transducer.*  Individuals may see enhanced performance from the 455 kHz element in the  XHS 9 HDSI 180 T  over that of the XNT 9 SI 180 T .  See our FAQ on the transducer exchange program . This transducer should not be used with any of our MEGA Side Imaging products.  

*NOTE:  The 899ci HD SI and the HELIX 9 SI GPS can support 800 kHz

 

The MEGA Side Imaging transducer, part number XM 9 20 MSI T  is made up of the following frequencies and beam angles:  

83/200/455/800 kHz and 1.2 MHz
20/60/86(2)/55(2)

This transducer is packed with the HELIX 12 CHIRP MEGA SI GPS G2N, HELIX 10 CHIRP MEGA SI GPS G2N and the HELIX 9 CHIRP MEGA SI GPS G2N models.

 Because of internal wiring and the added 1.2 MHz, this transducer would not  add any benefits if used with any other products.    

 

The high definition Side Imaging transducer, part number XT 14 20 HDSI T    is made up of the following frequencies and beam angles:

200/83/455/800 kHz
20/60/90/180 degrees

This transducer was designed for use and is packed with our ONIX SI models.  It is also for use with the ION Series products in conjunction with a  SM2000  or SM3000 .

 

 The high definition Side Imaging transducer, part number   XT 14 74 HDSI T    is made up of the following frequencies and beam angles:

200/50/455/800 kHz
200/60/90/180 degrees

This transducer was designed for use with our ONIX SI models being used in deep water applications.  It is also for use with the ION Series products in conjunction with a SM2000  or SM3000

 

The MEGA Side Imaging transducer, part number  XM 14 20 MSI T  is made up of the following frequencies and beam angles:  

83/200/455/800 kHz and 1.2 MHz
20/60/86(2)/55(2)

This transducer is packed with the SOLIX 12 MEGA SI and the SOLIX 15 MEGA SI models.

Because of internal wiring and the added 1.2 MHz, this transducer would  not  add any benefits if used with any other products.