There are a few different ways to do this.
1. If your model is still on our website in the Products section, you can go to that model and scroll down to the Spec/Suppport section
If you are new to Humminbird products, the first thing you will need to do is sign up for a user account in the MyHumminbird section of our site.
If you already have a user accou
Yes, you can use waypoints that you have created in other Humminbird products to your ONIX or ION unit. However, to do so, you must first convert these waypoints from .hwr files t
- Removes NMEA0183 functionality when i-Pilot Link is connected
- Corrects issues caused when user follows the contour while recording an iTrack and AutoPilot is turned on.
Unfortunately, the following Bottomline, Humminbird and Zercom models
are no longer serviceable. They can no longer be serviced due to
availability of parts. If you do not see
Unlike NMEA0183 devices which are basically registered by self-declaration there is a very rigid qualification process for NMEA 2000 devices, from both the software and hardware st
When connected to the Humminbird, this data is stored on the Humminbird. When not connected, newly created iTracks and Spot-Locks are stored in the Link controller.
This is to protect the proprietary mapping data contained in the LakeMaster chip.
Yes. However, your storage for iTracks and Spot-Locks will be limited to what can be stored in the Link controller.
1 - 10