How do I change the battery on my WeatherSense accessory?
If the low voltage message for the weather sense displays on your fish finder, you will need to change the battery. Check the battery by removing the panel on the back of the accessory and the internal gasketby placing a flat head screwdriver between the back panel and the outer edge of the case. Gently remove the printed circuit board by lifting theboard (with the end that has the two yellospostsclosest together) up and thengently flip it over. Take a non metal object (like a sharpened #2 pencil) to loosen the battery and push the battery out of the battery holder. Replacewith a new battery and re-assemble the circuit board, gasket and housing, being careful not to interfer with any electronic components.
- The gasket must be in the correct postion and the backpanel fully closed to prevent leaking and maintain the moisture-resistantproperties of the unit.
- Do not immerse this accessory in water; if unit is exposed to water, wipe with an absorbent cloth.
- Handle this accessory with care. Excessive force, extremes in temperature or humidity may result in diminshed functionality and unit lifespan.