Which GPS is in control when using i-Pilot® Link™?
NOTE: the i-Pilot Link’s GPS is always used for controlling the boat. Otherwise:
- When you tell the i-Pilot Link to use Spot-Lock it uses the GPS from the i-Pilot Link.
- When you mark a Spot-Lock on the Humminbird or use the active cursor to
mark a Spot-Lock on the Humminbird you will use the GPS from the Humminbird unit to mark this location.
- When you mark a waypoint on the Humminbird you use the GPS from the Humminbird.
- When you use the i-Pilot Link’s remote and press and hold the Spot-Lock
button it marks a waypoint using the Humminbird's GPS. This is a normal waypoint not a Spot-Lock
- When you use the i-Pilot Link’s remote and you press and release the Spot-Lock on the remote you will use the i-Pilot Link's GPS.
- When you initiate record for an iTrack from i-Pilot Link or the Humminbird while the two units are talking you will be
using the i-Pilot Link's GPS to record the iTrack.
- When you initiate record an iTrack from the Humminbird and it is not
talking to the i-Pilot Link then you will use the Humminbird's GPS.
- When the user initiates a Go To function on a
previously saved navigational item (Spot-Lock, Waypoint, iTrack) and the Humminbird is connected, the GPS coordinates always come from what is stored in
the Humminbird and is sent to the i-Pilot Link for navigation.